The International Maritime Dangerous Goods Code (IMDG Code) establishes basic principles such as detailed recommendations for individual substances, materials and articles, a number of recommendations for good operational practice, including advice on terminology, packing, labelling, stowage, segregation and handling, and emergency response action. There are many changes to the 2016 edition of the IMDG Code. The significant changes are outlined below:
–New and amended definitions, as well as updated references to training instruments.
– Significant changes in Part 2 Classification in order to include: a method of using test data to classify substances that are listed in the Dangerous Goods List (DGL) but meet the classification criteria for a hazard class or division that is not identified in the list, new criteria and documentation requirements for assigning fireworks to hazard divisions, the addition of new criteria for determining viscosity in Class 3 flammable liquids, the inclusion of polymerizing substances under Class 4.1, and new sections defining gases, flammable liquids, toxic substances, and corrosives that are not accepted for transport.
-New packing instructions have been added such as P005 for the new Engine proper shipping names under UN3528, UN3529 and UN3530, P412 for the new UN3527 ‘Polyester Resin Kit’-solid base material’ and P910 for the prototype and low production runs of lithium cells and batteries.
-A new large packaging packing instruction LP200 for aerosols has been added.
-A new Class 9 Miscellaneous Dangerous Goods label has been adopted for use when shipping lithium metal and lithium ion cells and batteries SP384.
-The ‘Overpack’ mark now has a 12 mm minimum height requirement.
-New ISO standards have been incorporated into the applicable packing instructions for gases and the design and construction criteria of UN pressure receptacles and multiple-element gas containers.
– Dangerous Goods List (DGL) updated and the proper shipping name entries for Engines and Vehicles under UN3166 have been separated. UN3166 now covers only ‘Vehicle’ entries and ‘Engines’ now fall under new UN3528, UN3529, and UN3530 entries.
-Polyester resin kits have been separated into two entries: UN3269 ‘Polyester Resin Kit’, liquid base material’ and new UN3527 ‘Polyester Resin Kit’, solid base material’.
-Polymerizing substances of Class 4.1 have been assigned to new entries UN3531, UN3532, UN3533 and UN3534.
-Special provisions for shipping certain common items have been amended (revised, removed or added): SP188 now requires a standardized lithium battery mark for excepted shipments of lithium cells and batteries. SP236 now includes Class 4.1 solid base materials for polyester resin kits. SP310 the lithium battery prototype and low production packaging requirements have been moved to a new packing instruction P910. SP312, 363, 961 and 962 have been revised. SP380 and 385 have been added. SP970 has been removed due to the separation of the proper shipping name entries for Engines and Vehicles.
Source: MSC.406(96)
Contact us to receive a professional advisory in your area of interest.